No Messages are being Received from the Communicator
1. Verify active alarms are not defined as a disabled state (refer to Setting the Test Schedule).
2. Go over the contact group, ensure the users are not set to 'idle' (refer to Adding names to the Address Book) and that the contact information is entered correctly.
3. Verify that the controllers are functioning properly (transmitting alarms or messages).
Alarm LED is ON but the Siren does not Operate
1. Check the siren's connection to the relay with the battery.
2. Perform an alarm relay test found in SYSTEM->Technician Tools->Test->Relays (refer to Test).
Comments
0 comments
Please sign in to leave a comment.